Dial Conversion - Philips Sopho 2000 IPS User Manual

DIAL CONVERSION

PROGRAMMING
START
CM10 Assign the card number of the DTMF Receiver
to the required LEN.
NOTE:
CM14 Assign the card number of the DTMF Receiver
to the required LEN.
[Series 3200 R6.2 software required]
NOTE:
CM12 Assign the type of telephone set to DTMF
stations. This data assignment is not required
term
for D stations.
CM45 Assign DTMF Receivers for use with DTMF
stations.
A
DESCRIPTION
E200 is dedicated to built-in DTMF
Receiver of the MP card.
E200 is dedicated to built-in DTMF
Receiver of the MP card.
(1) 000-763: LEN
(2) Card No. of DTMF Receiver (8RST)
For PIM0/1 : E201-E203
For PIM2/3 : E204-E207
For PIM4/5 : E208-E211
For PIM6/7 : E212-E215
(1) XX ZZZ: LEN
XX : 00-59: FP No.
ZZZ: 000-127: Port No.
(2) Card No. of DTMF Receiver (8RST)
For FP No. 00 : E201-E203
For FP No. 01 : E204-E207
For FP No. 02 : E208-E211
For FP No. 03 : E212-E215
• Y=00
(1) X-XXXXXXXX: Station No.
(2) 2: DTMF Telephone set
• Y=0 Make Busy
(1) XX Z
XX: DTMF Receiver Card No.
00: MP Built-in DTMF Receiver
01-15: PN-8RST
Z : 0-3: Circuit No.
(2) 1 : In service
• Y=1 PBR for incoming call from Tie Line/
DID
(1) XX Z: Same as CM45 Y=0
(2) 1 : For both DTMF station and Tie Line/
DID
– 267 –
DIAL CONVERSION
DATA
NWA-008845-001 Rev.5.0
32ch1005.fm