Philips Sopho 2000 IPS User Manual page 226

< Data Programming >
COMMAND 1st DATA
CM30 Y=00
CM30 Y=02
CM35 Y=12
CM35 Y=18
CM76 Y=00
CM76 Y=26
CM2A Y=50
CM2A Y=50
CM76 Y=01
CM76 Y=01
CM76 Y=09
CM76 Y=05
2nd DATA
000 00
000 18
00 3
00 0
7890 000
000 0
1234 010
2345 011
010 D13
011 D04
010 01
010 01
Assign the trunk route number 00 to the trunk num-
ber 000.
Set the ISDN Indial for the incoming calls.
Assign the number of digits to be received on DID to
4 digits.
Provide the trunk route number 00 with digit conver-
sion.
Assign the Number Conversion Block number 000
to the DID number 7890.
Provide the calling number development with the
Development Pattern 0 to the Number Conversion
Block number 000.
Assign the Development Block number 010 for the
calling party number 1234.
Assign the Development Block number 011 for the
calling party number 2345.
Assign TAS in Day Mode to the Development Block
number 010.
Assign Direct-In Termination in Day Mode to the
Development Block number 011.
Assign the station tenant number 01 to the Develop-
ment Block number 010.
Assign the trunk tenant number 01 to the Develop-
ment Block number 010.
– 208 –
CID CALL ROUTING
REMARKS
NWA-008845-001 Rev.5.0
32ch1004.fm