Philips Sopho 2000 IPS User Manual page 189

To permit a station within the Call Pickup group to answer the calls to other lines, in the order from a spec-
ified pilot station (ringing search start position):
START
CM16 Assign each Call Pickup group, by assigning
station numbers within a group one by one
with the following operation:
1st Operation : (1) Station A (2) Station B
2nd Operation : (1) Station B (2) Station C
Last Operation: (1) Station X (2) Station A
Specify a pilot station in Call Pickup group.
CM20 Assign the access code for Call Pickup-Group
(Pilot).
CM90 Assign a Call Pickup-Group key to each D
as required.
END
NOTE 1: There is no limit to the amount of Call Pickup groups.
NOTE 2: The maximum number of stations within a group is 60. Individual stations can be assigned to
only one Call Pickup group.
HARDWARE REQUIRED
term
D and DLC card as required
DESCRIPTION
• Y=0
(1) X-XXXXXXXX: Station No. to be includ-
(2) X-XXXXXXXX: Another Station No. to
• Y=8
(1) X-XXXXXXXX: Station No. to be includ-
(2) 0 : Pilot Station
1 : Member Station
• Y=0-3 Numbering Plan Group 0-3
(1) X-XXXX: Access Code
(2) A234: Call Pickup-Group (Pilot)
term
, • Y=00
(1) My Line No. +
(2) F0B34: Call Pickup-Group (Pilot)
– 171 –
CALL PICKUP
CALL PICKUP-GROUP
DATA
ed in the Call Pickup
group
be included in the same
group
ed in the Call Pickup
group
,
+ Key No.
NWA-008845-001 Rev.5.0
32ch1003.fm