Philips Sopho 2000 IPS User Manual page 332

To access the Digital Announcement Trunk (DAT card) via DISA, add the following programming.
START
CM10 Assign a Digital Announcement Trunk card
number to the required LEN.
NOTE 1:
CM14 Assign a Digital Announcement Trunk card
number to the required LEN.
[Series 3200 R6.2 software required]
NOTE 1:
CM2A Assign Service Restriction Class A for Digital
Announcement Trunk access to the required
ID Code Pattern number.
CM15 Allow Digital Announcement Trunk access in
Service Restriction Class A assigned by
CM2A Y=12.
CM20 To record and replay a message from an out-
side user, assign the Digital Announcement
Trunk access code, respectively.
END
DESCRIPTION
The Digital Announcement Trunk
card number must be assigned to the
first LEN (Level 0), the third LEN
(Level 2), the fifth LEN (Level 4) and
the seventh LEN (Level 6) of each
LT slot.
The Digital Announcement Trunk
card number must be assigned to the
first LEN (Level 0), the third LEN
(Level 2), the fifth LEN (Level 4) and
the seventh LEN (Level 6) of each
LT slot.
DIRECT INWARD SYSTEM ACCESS (DISA)
(1) 000-763: LEN
(2) EB002-EB127: Digital Announcement
For PIM0/1
For PIM2/3
For PIM4/5
For PIM6/7
NOTE 2:
(1) XX ZZZ: LEN
XX : 00-59: FP No.
ZZZ: 000-127: Port No.
(2) EB002-EB127: Digital Announcement
For FP No. 00 : EB002-EB031
For FP No. 01 : EB032-EB063
For FP No. 02 : EB064-EB095
For FP No. 03 : EB096-EB127
NOTE 2:
• Y=12
(1) 0000-2999: ID Code Pattern No. assigned
(2) 00-15 : Service Restriction Class A
• Y=33
(1) 00-15: Service Restriction Class A as-
(2) 1 : Allow
• Y=0-3 Numbering Plan Group 0-3
(1) X-XXXX: Access Code
(2) A100: Record
A101: Replay
– 314 –
DATA
Trunk Card No.
: EB002-EB031
: EB032-EB063
: EB064-EB095
: EB096-EB127
EB000 and EB001 are dedicated
to built-in Digital Announcement
Trunk of the MP card.
Trunk Card No.
EB000 and EB001 are dedicated
to built-in Digital Announcement
Trunk of the MP card.
by CM2A Y=00-09
signed by CM2A Y=12
NWA-008845-001 Rev.5.0
32ch1006.fm