Philips Sopho 2000 IPS User Manual page 702

B
CM74 Assign the abbreviated code to each Memory
Slot number that is assigned the stored number
by CM74 Y=0.
NOTE 1:
4-digit (Fixed) abbreviated code is used for Series 3300 to 3500 software.
1-8-digit abbreviated code is used for Series 3600 software or later.
NOTE 2: Memory area of System Speed Dialing with 1-8-digit abbreviated code is also used as the
memory area of Station Speed Dialing. Do not assign the same Memory Slot number of
System Speed Dialing with 1-8-digit abbreviated code (set by CM74 Y=0) as Memory Slot
number of Station Speed Dialing (set by CM73).
NOTE 3: Set the same number of digits as the digits of abbreviated code assigned by CM42>77 to
the second data.
NOTE 4: When setting the number of digits for abbreviated code to 5-8, the minimum number of the
abbreviated code that can be registered to the memory area is as follows.
• 5-digit abbreviated code: 500
• 6-digit abbreviated code: 333
• 7-digit abbreviated code: 250
• 8-digit abbreviated code: 200
CM08 Specify System Speed Dialing security.
(Stored number displays on D
ing call by System Speed Dialing.)
Specify Toll Restriction for an outgoing call by
System Speed Dialing, if required.
END
DESCRIPTION
term
for an outgo-
• Y=5
(1) X-XXXXXXXX: Abbreviated Code
X: 0-9
(2) X YY Z
X : 0-9: 1000-Slot Memory Block No.
YY: 00-99: 10-Slot Memory Block No.
Z : 0-9: Memory Parcel No.
NONE : No data
(1) 043
(2) 0 : Not displayed
1 : To display
(1) 044
(2) 0 : Not provided
1 : To provide
– 684 –
SYSTEM SPEED DIALING
DATA
NWA-008845-001 Rev.5.0
32ch1010.fm
JANUARY/20/2006