Philips Sopho 2000 IPS User Manual page 38

The following features require no programming.
• Alarm Indications
• Attendant Console
– Attendant Called/Calling Number
– Attendant Lamp Check
– Attendant Training Jacks
– Audible Indication Control
– Call Processing Indication
– Time Display
• Attendant Lockout
• Elapsed Call Timer
• Feature Activation from Secondary Extension
• Handsfree Answerback
• Handsfree Dialing and Monitoring
• Non-exclusive Hold
• Night Service
– Day/Night Mode Change by Attendant Console
For the following features, refer to the NEAX 2000 IPS manuals mentioned below.
Refer to the System Manual:
• Automatic Program Download for IP Enabled
term term
D /D IP
• Bandwidth Control
• Call Forwarding-Logout (D
term
• D IP
term
Refer to the D Assistant User Guide:
term
• D Assistant
Refer to the Open Application Interface (OAI) System Manual:
• Open Application Interface (OAI)
Refer to the Q-SIG System Manual:
• Q-SIG Circuit Switched Basic Call-ETSI Version
Refer to the Remote PIM System Manual:
• TDM based Remote PIM
• Maintenance Administration Terminal (MAT)
• Power Failure Transfer
• Proprietary Multiline Terminal
• Reserve Power
• Resident System Program
• Voice Mail Private Password
term
IP)
– 20 –
CHAPTER 1 BUSINESS FEATURES
– Battery Release Control
– Configuration Report
– Called Station Status Display
– Handsfree Unit
– I-Hold/I-Use Indication
– Microphone Control
• FAX over IP
term
• IP Enabled D
• Modem over IP
• SNMP
• VoIP
NWA-008845-001 Rev.5.0
32ch1001.fm
DECEMBER/02/2005