Philips Sopho 2000 IPS User Manual page 526

A
CM15 Allow the ICI/OPE key in Service Restriction
Class B assigned by CM12 Y=02.
NOTE: The Service Restriction Class num-
ber for the Attendant Position
should be different from an ordinary
station.
CM12 Assign a Hotline station to each ICI/OPR line
number. With this assignment, each ICI/OPR
line is restricted from call origination.
CM17 Assign a UCD station to each ICI/OPR line
number. With this assignment, ICI/OPR lines
are provided the call-queuing facility individu-
ally.
CM20 Assign the access code for Priority Call 0 used
for Attendant Position access.
CM51 Assign the destination of Priority Call 0 to
each OPR line.
CM08 Destination of Priority Call 0.
CM30 On the required trunks, assign the destination
of DIT to each ICI line.
B
DESCRIPTION
MULTILINE TERMINAL ATTENDANT POSITION
• Y=73
(1) 00-15: Service Restriction Class B as-
(2) 0: ICI/OPE key
• Y=03
(1) AB00-AB99: ICI/OPR No.
(2) 04: Hotline
• Y=1
(1) AB00-AB99: ICI/OPR Line No.
(2) 1: Pilot station
• Y=2
(1) AB00-AB09: ICI/OPR Line No.
(2) 00-15: UCD Group No.
NOTE: Individual UCD Group number must
be assigned to each ICI/OPR Line
number.
• Y=0-3 Numbering Plan Group 0-3
(1) X-XXXX: Attendant Position Access Code
(2) A088
• Y=12
(1) 00-63: Tenant No.
(2) AB00-AB99: OPR Line No.
(1) 250
(2) 0: Same station as Off Hook Alarm
• Y=02
(1) 000-255: Trunk No.
(2) 04: Direct-in Termination
• Y=04
(1) 000-255: Trunk No.
(2) AB00-AB99: ICI Line No.
– 508 –
DATA
signed by CM12 Y=02
NWA-008845-001 Rev.5.0
32ch1008.fm