Philips Sopho 2000 IPS User Manual page 287

B
CM35 Specify the DTMF Sender characteristics to
match the Central Office.
CM08 Assign whether "*" or "#" from a DTMF Tele-
phone is used as a Switch Hook Flash while
hearing Busy Tone.
END
HARDWARE REQUIRED
DTMF Receiver (8RST card) × n
n: Depends on the number of DTMF stations and the traffic condition of the system.
DESCRIPTION
• Y=24 DTMF Inter Digital Pause
(1) 00-63: Trunk Route No.
(2) 0 : 32 ms.
1 : 64 ms.
2 : 80 ms.
3 : 96 ms.
4 : 160 ms.
5 : 192 ms.
6 : 240 ms.
7 : 128 ms.
• Y=26 DTMF Sender Signal Width
(1) 00-63: Trunk Route No.
(2) 0 : 64 ms.
1 : 128 ms.
• Y=46 DTMF Sender Release Timing
(1) 00-63: Trunk Route No.
(2) 0 : 2 seconds
1 : 4 seconds
2 : 6 seconds
3 : 8 seconds
4 : 12 seconds
5 : 14 seconds
6 : 16 seconds
7 : 10 seconds
(1) 050: * is used as Switch Hook Flash
(2) 0: Effective
(1) 051: # is used as Switch Hook Flash
(2) 0: Effective
– 269 –
DIAL CONVERSION
DATA
NWA-008845-001 Rev.5.0
32ch1005.fm