Philips Sopho 2000 IPS User Manual page 170

B
CM65 Select the feature available in each tenant
when an internal call and a Tie Line/C.O.
incoming call are terminated.
Select the feature available in each tenant
when an internal call via CCIS and a Tie Line/
C.O. incoming call via CCIS are terminated.
NOTE:
CM65 Y=37/38/39 is effective only
when CM08>608 2nd data=0.
CM78 Assign the destination of Split Call Forward-
ing. (See NOTE
CM48 Select the Dial Tone on setting Split Call
Forwarding-All Calls.
END
DESCRIPTION
in next page.)
SPLIT CALL FORWARDING-ALL CALLS
• Y=23 Internal Call or ATT assisted Call
• Y=24 C.O. Incoming Call
• Y=25 Tie Line Incoming Call
(1) 00-63: Tenant No.
(2) 0 : Split Call Forwarding
1 : Call Forwarding
• Y=37 Internal Call or ATT assisted Call via
CCIS
• Y=38 C.O. Incoming Call via CCIS
• Y=39 Tie Line Incoming Call via CCIS
(1) 00-63: Tenant No.
(2) 0 : Split Call Forwarding
1 : Call Forwarding
(1) XX Y
XX: 00-63: Tenant No.
Y : 0-7: Block No.
(2) X-XX +
X-XX : Trunk Access Code (1-2 digits)
YY···Y: Called No.
X-XXXXXXXX: Station No. (1-8 digits)
• Y=2
(1) 13: Dial Tone on setting Split Call Forward-
ing-All Calls
(2) 0 : Special Dial Tone (Stutter Dial Tone)
1 : Dial Tone
– 152 –
CALL FORWARDING
DATA
,
+ YY···Y
(Maximum 26 digits)
NWA-008845-001 Rev.5.0
32ch1003.fm