Philips Sopho 2000 IPS User Manual page 494

To store the calling number automatically when the station call via CCIS is abandoned, do the following
programming:
[Series 3800 software required]
START
CM08 Assign the data so as to store the calling num-
ber automatically when the station call via
CCIS is abandoned.
CM35 Assign the Pattern number for adding an
access code for outgoing call to the calling
number stored by Message Reminder when
terminating a tandem call via CCIS.
Provide the trunk route with the CID Call
Back.
CM50 Assign the Pattern number for adding an
access code for outgoing call to the calling
number stored by Message Reminder when
terminating a tandem call via CCIS.
END
HARDWARE REQUIRED
Single-Line Telephone with MW Lamp
8LC or 4LCD card
DESCRIPTION
(1) 583
(2) 0: To store
• Y=279
(1) 00-63: Trunk Route No.
(2) 0-7
NONE : No data
• Y=150
(1) 00-63: Trunk Route No.
(2) 0: To provide
• Y=11
(1) 0-7: Pattern No. 0-7 assigned by CM35
Y=279
(2) X-XXXXXX: Access Code for outgoing
X: 0-9, A (*), B (#)
– 476 –
MESSAGE REMINDER
DATA
: Pattern No. 0-7
call
NWA-008845-001 Rev.5.0
NOVEMBER/15/2006
32ch1008.fm