Philips Sopho 2000 IPS User Manual page 336

To abbreviate the ID Code entry when digit conversion on DID call is not provided
(CM35 Y=18 is set to "1"):
C
CM76 Assign the Number Conversion Block number
to the DID number.
Specify the terminating system as DISA.
Set the calling party number to be used as the
ID Code for DISA when the DID number as-
signed by CM76 Y=00 is sent.
Allow the service setting by DISA without di-
aling the ID Code.
CM2A Assign the ID Code Development number, for
Call Forwarding set by DISA.
Assign the calling party number as the ID
Code for DISA.
D
DESCRIPTION
DIRECT INWARD SYSTEM ACCESS (DISA)
• Y=00
(1) X-XXXX: DID No.
(2) 000-999: Number Conversion Block No.
• Y=01 Day Mode
• Y=02 Night Mode
• Y=03 Mode A
• Y=04 Mode B
(1) 000-999: Number Conversion Block No.
(2) D16: DISA
• Y=14
(1) 000-999: Number Conversion Block No.
(2) 0: Available
• Y=15
(1) 000-999: Number Conversion Block No.
(2) 15 : Service setting without dialing the ID
Code
• Y=A0
(1) 3: Automatic service setting by DISA
(2) 0-9: ID Code Development No. 00-09
• Y=00-09 ID Code Development No. 00-09
(1) X-XX...XX: Calling Party No.
(2) 0000-2999: ID Code Pattern No.
– 318 –
CALL FORWARDING SET BY DISA
DATA
000-999
assigned by CM76 Y=00
assigned by CM76 Y=00
assigned by CM76 Y=00
(Maximum 16 digits)
NWA-008845-001 Rev.5.0
32ch1006.fm