Philips Sopho 2000 IPS User Manual page 514

To provide Mobility Access (MA), do the following programming.
START
CM12 Assign Service Restriction Class A to each sta-
tion.
CM15 Allow Mobility Access mode in Service Re-
striction Class A assigned by CM12 Y=02.
NOTE:
CM76 Assign the following Mobility Access function
to each DID Number.
- For MA termination : 1 (2nd data=0)
- For MA mode setting: 1 (2nd data=1)
- For MA mode cancel: 1 (2nd data=2)
- For MA station
CM64 Assign a trunk access code for call forwarding
in Mobility Access mode.
END
DESCRIPTION
This command is set to the Mobility
Access station.
: Same number of MA
station (2nd data=7)
• Y=02
(1) X-XXXXXXXX: Station No.
(2) XX ZZ
XX: 00-15 : Service Restriction Class A
• Y=216
(1) 00-15: Service Restriction Class A as-
signed by CM12 Y=02
(2) 0 : Restricted
1 : Allow
• Y=41
(1) 000-999: Number Conversion Block No.
(2) 0 : To use Mobility Access termination
1 : To set Mobility Access Mode
2 : To cancel Mobility Access Mode
7 : Not used Mobility Access function
• Y=10
(1) 00-63: Tenant No.
(2) X-XXXX: Trunk Access Code (1-4 digits)
NONE
– 496 –
MOBILITY ACCESS
DATA
assigned by CM76 Y=00/90
: No data
NWA-008845-001 Rev.5.0
JUNE/01/2007
32ch1008.fm