Fax Arrival Indicator - Philips Sopho 2000 IPS User Manual

FAX ARRIVAL INDICATOR

PROGRAMMING
Hotlines or House Phone feature assignment is used to implement this feature.
The number of facsimile station numbers and facsimile call station numbers that can be assigned varies
with each of the following cases.
• When Hotlines-Inside/Outside are used, a maximum of 100 facsimile stations can be assigned. In ad-
dition, a maximum of 100 facsimile call stations can be assigned.
• When House Phone groups are used, a maximum of four facsimile stations can be assigned. In addi-
tion, there is no limit to the number of facsimile call stations that can be assigned to each facsimile
station.
(1) Hotlines
START
CM10 Assign the fax call station number. This num-
ber is used as the fax call indicator button on
term
the D . Also this is the number to which the
incoming fax call is directed.
CM14 Assign the fax call station number. This num-
ber is used as the fax call indicator button on
term
the D . Also this is the number to which the
incoming fax call is directed.
[Series 3200 R6.2 software required]
CM11 Assign a virtual number to be used as a fax call
station number. (Similar to CM10/CM14
above but using a virtual extension instead of a
real station number.)
CM13 Assign the function of fax call station to the
station or extension assigned above in either
CM10/CM14 or CM11.
A
DESCRIPTION
(1) 000-763: LEN
(2) X-XXXXXXXX
FX-FXXXXXXXX: My Line No.
(1) XX ZZZ: LEN
XX : 00-59: FP No.
ZZZ: 000-127: Port No.
(2) X-XXXXXXXX
FX-FXXXXXXXX: My Line No.
(1) 000-255: Virtual LEN
[Series 3300 software or before]
0000-1019: Virtual LEN
[Series 3400 software or later]
(2) X-XXXXXXXX: Virtual Extension No.
• Y=29
(1) X-XXXXXXXX: Station No.
(2) 0 : Fax call station
1 : Ordinary station
– 381 –
FAX ARRIVAL INDICATOR
DATA
: Single Line Station
No.
: Single Line Station
No.
NWA-008845-001 Rev.5.0
32ch1007.fm