Caller Id-Station - Philips Sopho 2000 IPS User Manual

CALLER ID-STATION

PROGRAMMING
START
CM10 Assign the Caller ID sender (SDT) card num-
ber to the required LEN.
NOTE:
Assign the station number of an analog tele-
phone for Caller ID-Station to the required
LEN.
NOTE:
CM14
Assign the Caller ID sender (SDT) card num-
ber to the required LEN.
[Series 3200 R6.2 software required]
NOTE:
Assign the station number of an analog tele-
phone for Caller ID-Station to the required
LEN.
[Series 3200 R6.2 software required]
NOTE:
CM04 Assign the purpose of the Caller ID sender.
A
DESCRIPTION
The SDT card number must be as-
signed to the first LEN (Level 0) of
each LT slot. Level 1-3 remain
"NONE".
The station number must be as-
signed to the first LEN (Level 0), the
second LEN (Level 1), the third LEN
(Level 2) and the fourth LEN (Level
3) of each LT slot.
The SDT card number must be as-
signed to the first LEN (Level 0) of
each LT slot. Level 1-3 remain
"NONE".
The station number must be as-
signed to the first LEN (Level 0), the
second LEN (Level 1), the third LEN
(Level 2) and the fourth LEN (Level
3) of each LT slot.
(1) 000-763: LEN
(2) C200-C203: SDT Card No.
(1) 000-763: LEN
(2) X-XXXXXXXX: Station No.
(1) XX ZZZ: LEN
XX : 00-59: FP No.
ZZZ: 000-127: Port No.
(2) C200-C203: SDT Card No.
(1) XX ZZZ: LEN
XX : 00-59: FP No.
ZZZ: 000-127: Port No.
(2) X-XXXXXXXX: Station No.
• Y=01
(1) 02
(2) 0: Caller ID-Station
– 190 –
CALLER ID-STATION
DATA
NWA-008845-001 Rev.5.0
32ch1003.fm