Philips Sopho 2000 IPS User Manual page 767

A
CM20 Assign the access code for MW lamp set/reset
from a VMS station port.
Assign the access code to retrieve a message
from the VMS and search Message Reminder/
Message Waiting.
CM50 Assign the access code to be sent out to a VMS
after/before a Mail Box number, if required.
NOTE 1: "C" or "D" should not be assigned
as the first digit of an access code, to
insert prepause timing. Prepause
timing is assigned by CM41
Y=0>44.
NOTE 2: If "C" is inserted in the access code,
it can be used as a pause (1.5 sec-
onds). To provide a programmable
pause, insert "D" instead of "C"
(Programmable Pause: CM41
Y=0>38).
CM41 Specify the prepause timing, DTMF signal
width, and Inter-digital pause for VMS.
Specify the DTMF signal width for VMS.
Specify the DTMF inter-digital pause for
VMS.
B
DESCRIPTION
• Y=0-3 Numbering Plan Group 0-3
(1) X-XXXX: Access code
(2) A040: Set
A041: Reset
• Y=0-3 Numbering Plan Group 0-3
(1) X-XXXX: Access code
(2) A146: Search
A147: Retrieve
• Y=00
(1) 3: Access Code to be sent out before a Mail
Box No.
4: Access Code to be sent out after a Mail
Box No.
(2) XX-XXXX: Access code to be sent out to a
X: 0-9, A (*), B (#), C/D (Pause)
NONE
• Y=0
(1) 44: Prepause Timing
(2) 00-12, 13: 0-12, 0.5 seconds
If no data is set, the default setting is 1 second.
• Y=0
(1) 48
(2) 01: 64 ms.
02: 128 ms.
If no data is set, the default setting is 128 ms.
• Y=0
(1) 49
(2) 01: 32 ms.
02: 64 ms.
03: 80 ms.
04: 100 ms.
If no data is set, the default setting is 160 ms.
– 749 –
VOICE MAIL INTEGRATION
DATA
NOTE 1
VMS
NOTE 2
: Not sent out
05: 120 ms
06: 160 ms.
07: 200 ms.
08: 240 ms.
NWA-008845-001 Rev.5.0
32ch1011.fm