Philips Sopho 2000 IPS User Manual page 218

A
CM08 Specify the operation for calling number auto-
matically storing per station when the number
of calling number is over the maximum.
[Series 3900 software required]
NOTE: This command is effective only for
automatically storing calling num-
ber of trunk calls.
CM13 Provide each D
CM12 Assign Service Restriction Class A for CID
Call Back to the required stations.
CM15
Allow CID Call Back in Service Restriction
Class A assigned by CM12 Y=02.
CM35 Provide the trunk route with the CID Call
Back.
Assign the trunk access code for CID Call
Back.
This trunk access code will be saved and sent
with the calling number.
CM29 Assign a Numbering Plan Group number to
each tenant.
CM20 Assign the access code for Message Waiting/
Message Reminder Search/Retrieve/Set/
Cancel.
B
DESCRIPTION
term
with Message Waiting.
(1) 589
(2) 0 : To delete the oldest calling number
and store the new calling number
1 : Not stored the new calling number
• Y=03
(1) X-XXXXXXXX: Station No.
(2) 0: To provide
• Y=02
(1) X-XXXXXXXX: Station No.
(2) XX ZZ
XX: 00-15 : Service Restriction Class A
• Y=126
(1) 00-15: Service Restriction Class A as-
(2) 0: Allow
• Y=150
(1) 00-63: Trunk Route No.
(2) 0: To provide
• Y=44
(1) 00-63: Trunk Route No.
(2) 0-9/00-99: Trunk Access Code
(1) 00-63: Tenant No.
(2) 710-713: Numbering Plan Group 0-3
• Y=0-3 Numbering Plan Group 0-3
(1) X-XXXX: Access Code
(2) A146: Message Waiting Search
A147: Message Waiting Retrieve
A148: Message Reminder Set
A149: Message Reminder Cancel
– 200 –
CID CALL BACK
DATA
signed by CM12 Y=02
NWA-008845-001 Rev.5.0
32ch1004.fm
JUNE/01/2007