Philips Sopho 2000 IPS User Manual page 626

When CM08>570 is set to 1, the associated access codes become as shown below, and these access codes
cannot be changed.
On Busy Tone Connection
1. None
2. Call Back/Trunk Queuing-Outgoing
NOTE 1, 2
3. Executive Override
4. Camp-On
5. Call Waiting
6. Message Reminder/Message Waiting Set
7. Step Call (7 + Last one digit)
8. Message Waiting Record
9. None
NOTE 1: This feature cannot be set from Attendant Console.
NOTE 2: This feature cannot be set from a station having a held call.
NOTE 3: This feature can be set only from a station having a held incoming call.
NOTE 4: From a DTMF telephone, a hooking operation is required before dialing the single digit access
code.
This feature is mutually exclusive with Step Call.
However, 2 digit dialing Step Call can be provided by using this feature.
NOTE 1, 2
NOTE 3
SINGLE DIGIT FEATURE ACCESS CODE
On Ring Back Tone Connection
1. Internal Tone/Voice Signaling
2. Call Back-Don't Answer
3. None
4. None
5. None
6. Message Reminder/Message Waiting Set
7. None
8. Message Waiting Record
9. None
– 608 –
NOTE 4
NOTE 1, 2, 4
NOTE 4
NOTE 4
NWA-008845-001 Rev.5.0
32ch1010.fm
DECEMBER/02/2005