Philips Sopho 2000 IPS User Manual page 568

B
CM76 Specify the interval of ringing tone for DID in-
coming call with no CLI.
NOTE 1: Assign this command when the ter-
minal destination is SLT or D
NOTE 2: This command is effective when
CM76 Y=34, 36 is set to 0 or 2.
term
Specify a D
incoming call with no CLI.
NOTE 1: This command is effective when
CM76 YY=34, 36 is set to 0 or 2,
and D
call.
NOTE 2: For details of the Ringer Tone Pat-
tern, see CM65 Y=40.
Specify a kind of call termination indicator
key/lamp on Attendant console for DID in-
coming call with no CLI.
NOTE:
The command is effective when
CM76 Y=34, 36 is set to 0, and the
destination of call forwarding is At-
tendant console.
END
DESCRIPTION
Ringer Tone Pattern for DID
term
receives the incoming
• Y=38
(1) 000-999: Block No.
(2) 0 : 0.5 seconds ON-0.5 seconds OFF
(D
term
. 1 second ON-2 seconds OFF (SLT)
1 : 0.5 seconds ON-0.5 seconds OFF -
0.5 seconds ON-1.5 seconds OFF
(D
0.4 seconds ON-0.2 seconds OFF -
0.4 seconds ON-2 seconds OFF (SLT)
2 : 1 second ON-2 seconds OFF (D
SLT)
3 : As per CM76 Y=22
[For North America]
• Y=39
(1) 000-999: Block No.
(2) 0 : Ringer Tone Pattern 0
1 : Ringer Tone Pattern 1
2 : Ringer Tone Pattern 2
3 : Ringer Tone Pattern 3
4 : Ringer Tone Pattern 4
5 : Ringer Tone Pattern 5
6 : Ringer Tone Pattern 6
7 : As per CM76 Y=23
• Y=40
(1) 000-999: Block No.
(2) 0 : C.O. Incoming Call 0
1 : C.O. Incoming Call 1
2 : C.O. Incoming Call 2
3 : C.O. Incoming Call 3
4 : C.O. Incoming Call 4
5 : C.O. Incoming Call 5
6 : C.O. Incoming Call 6
7 : As per CM35 YY=15
– 550 –
NO CID CALL ROUTING
DATA
term
)
term
)
NWA-008845-001 Rev.5.0
term
or
32ch1009.fm
JULY/01/2006