Philips Sopho 2000 IPS User Manual page 178

B
CM08 Specify the setting method for Call Forward-
ing-No Answer-Outside.
Assign whether an extension can set a destina-
tion of Split Call Forwarding-No Answer-Out-
side by entering only a trunk access code.
Select the trunk route seized for Split Call
Forwarding-No Answer-Outside.
Select the Call Forwarding type when an
incoming call terminates via CCIS.
CM90 Assign Call Forwarding-No Answer keys to
term
the D s, as required.
Assign Split Call Forwarding-No Answer keys
term
to the D s, as required.
CM65 Select the feature available in each tenant
when an internal call and a Tie Line/C.O. in-
coming call are terminated.
C
DESCRIPTION
SPLIT CALL FORWARDING-NO ANSWER
(1) 222
(2) 0 : Setting when the station goes on hook/
when receiving Service Set Tone
(ORT time out)
1 : Setting when receiving Service Set
Tone (ORT time out)
(1) 386
(2) 0 : Restricted
1 : Allowed
(1) 600
(2) 0 : By calling party's tenant/terminating
trunk's tenant
1 : By Call Forwarding setting station's
tenant
(1) 608
(2) 0 : As per CM65 Y=37/38/39
1 : As per CM65 Y=23/24/25
• Y=00
(1) My Line No. +
(2) F0016: Call Forwarding-No Answer Set/
For setting the same key as Call Forwarding-
Busy Line.
(1) My Line No. +
(2) F0012: Call Forwarding-No Answer/Busy
• Y=00
(1) My Line No. +
(2) F0A82: Split Call Forwarding-Busy Line/
• Y=23 Internal Call or ATT assisted Call
• Y=24 C.O. Incoming Call
• Y=25 Tie Line Incoming Call
(1) 00-63: Tenant No.
(2) 0 : Split Call Forwarding
1 : Call Forwarding
– 160 –
CALL FORWARDING
DATA
,
+ Key No.
Cancel
,
+ Key No.
Line Set/Cancel
,
+ Key No.
No Answer Set/Cancel
NWA-008845-001 Rev.5.0
32ch1003.fm