Philips Sopho 2000 IPS User Manual page 659

E
CMD003 Assign maximum number of Call Record sent
to SMDR which is set to "4" by CMD001>80/
100/120/140.
Assign maximum number of Call Record sent
to SMDR which is set to "5" by CMD001>80/
100/120/140.
NOTE 1: When the data is set to 1-27000, external alarm of memory overflow is available if CM44
2nd data=3001 (for CMD003>29)/CM44 2nd data=3002 (for CMD003>24) or CMEA
Y=2>28, 38 is assigned.
NOTE 2: The amount of call record number set by CMD003>23, 24, 25, 26, 28, 29, 30 must not ex-
ceed the following number.
Amount of Call Records number of CMD003 1st data 23, 24, 25, 26, 28, 29, 30
No EXPMEM on AP00 is provided
When CMD001>179
is set to 0
(Local Office of
Centralized Billing-
CCIS/Stand-alone)
1600
Maximum number of each 1st data of CMD003 is as follows:
1ST DATA
24, 25, 26, 29
NOTE 3:
CMD003>23, 24, 25, 26, 28, 29, 30 are effective after executing CMD102. Before execut-
ing CMD102, be sure to print out all of the stored call records. CMD102 deletes all of the
stored call records.
F
DESCRIPTION
When CMD001>179
is set to 1
(Center Office of
Centralized Billing-
CCIS)
800
No EXPMEM on AP00 is provided
23, 30
28
STATION MESSAGE DETAIL RECORDING (SMDR)
(1) 29
(2) 0
1-27000 : 1 call-27000 calls
(1) 24
(2) 0
1-27000: 1 call-27000 calls
EXPMEM on AP00 is provided
When CMD001>179
is set to 0
(Local Office of
Centralized Billing-
CCIS/Stand-alone)
27000: When CMD003>28 is set to 0
(Call Record for CIS is not provided)
26000: When CMD003>28 is set to other than 0
(Call Record for CIS is provided)
1000
1600
1020
– 641 –
PROGRAMMING
DATA
: Not record
: Not record
When CMD001>179
is set to 1
(Center Office of
Centralized Billing-
CCIS)
EXPMEM on AP00 is provided
1000
27000
12000
NWA-008845-001 Rev.5.0
DECEMBER/02/2005
32ch1010.fm