Philips Sopho 2000 IPS User Manual page 55

To provide a voice message when an incoming DID line/Tie line call has been terminated to a station and
encounters a busy or no answer condition:
START
CM10 Assign a Digital Announcement Trunk card
number to the required LEN.
NOTE 1:
Assign a Digital Announcement Trunk card
CM14
number to the required LEN.
[Series 3200 R6.2 software required]
NOTE 1:
CM12 Assign Service Restriction Class A for Digital
Announcement Trunk Access
(Record/Replay/Delete).
CM15 Allow Digital Announcement Trunk Access in
Service Restriction Class A assigned by CM12
Y=02.
CM41 Specify the transferred timing when an incom-
ing DID Line/Tie Line call encounters a no an-
swer condition.
A
DESCRIPTION
The Digital Announcement Trunk
card number must be assigned to the
first LEN (Level 0), the third LEN
(Level 2), the fifth LEN (Level 4) and
the seventh LEN (Level 6) of each
LT slot.
The Digital Announcement Trunk
card number must be assigned to the
first LEN (Level 0), the third LEN
(Level 2), the fifth LEN (Level 4) and
the seventh LEN (Level 6) of each
LT slot.
(1) 000-763: LEN
(2) EB002-EB127: Digital Announcement
For PIM0/1
For PIM2/3
For PIM4/5
For PIM6/7
NOTE 2: EB000 and EB001 are dedicated to
built-in Digital Announcement Trunk
of the MP card.
(1) XX ZZZ: LEN
XX : 00-59: FP No.
ZZZ: 000-127: Port No.
(2) EB002-EB127: Digital Announcement
For FP No. 00 : EB002-EB031
For FP No. 01 : EB032-EB063
For FP No. 02 : EB064-EB095
For FP No. 03 : EB096-EB127
NOTE 2: EB000 and EB001 are dedicated to
built-in Digital Announcement Trunk
of the MP card.
• Y=02
(1) X-XXXXXXXX: Station No.
(2) XX ZZ
XX: 00-15 : Service Restriction Class A
• Y=33
(1) 00-15: Service Restriction Class A as-
signed by CM12 Y=02
(2) 1 : Allow
• Y=0
(1) 01
(2) 01-30: 4-120 seconds
(4 second increments)
If no data is set, the default setting is 32-36
seconds.
– 37 –
ANNOUNCEMENT SERVICE
DATA
Trunk Card No.
: EB002-EB031
: EB032-EB063
: EB064-EB095
: EB096-EB127
Trunk Card No.
NWA-008845-001 Rev.5.0
32ch1001.fm