Group Feature Key - Philips Sopho 2000 IPS User Manual

GROUP FEATURE KEY

[Series 3500 software required]
PROGRAMMING
To provide the Group Feature Key for the sub line of D
START
CM90 Provide Group Feature Key for the sub line of
term
D , when the D
stations and accommodates the station num-
ber/My line number of group members to the
term
D multiline as the sub line.
NOTE:
CM08 Specify the operation of Group Feature Key on
term
D when an incoming call/holding call can-
not be seized with My line because it is used by
the other D
Specify whether the service which is set to a
group member station is effective when the
group members are called by Group Feature
Key.
[Series 3800 software required]
NOTE:
END
DESCRIPTION
term
belongs to the group of
Do not set the second data 0 to the
term
My line number of D
term
on multiline.
When the second data of
CM08>585 is set to 0, the following
services are effective.
Call Forwarding-All Calls/Split
Call Forwarding-All Calls/Call
Forwarding-All Calls of Mobility
Access/Do Not Disturb/Transfer the
call to station set Do Not Disturb
(CM51 Y=10)/Call Forwarding-Lo-
gout
PROPRIETARY MULTILINE TERMINAL
term
, do the following programming.
• Y=06
(1) Sub Line No. +
(2) 0 : To provide
1 : Not provided
s.
(1) 557
(2) 0 : Group Feature Key is unavailable
1 : Group Feature Key is available by
(1) 585
(2) 0 : Effective
1 : Ineffective
– 577 –
GROUP FEATURE KEY
DATA
,
+ Key No.
seizing Sub line
NWA-008845-001 Rev.5.0
NOVEMBER/15/2006
32ch1009.fm