Philips Sopho 2000 IPS User Manual page 177

A
CM13 Specify the timing of Call Forwarding-No
Answer.
NOTE:
When CME6 Y=07, 08 are set, the timing on a station basis (CME6 Y=07, 08) is effective.
When CME6 Y=07, 08 are not set, the timing on a system basis (CM41 Y=0>100, 101) is
effective.
[Series 3200 R6.2 software required]
CM41 Specify the timing of Call Forwarding-No
Answer for a trunk incoming call.
Specify the timing of Call Forwarding-No
Answer for an internal call or an assisted call.
CM35 To apply this feature to incoming calls, set the
trunk route combinations for Tandem Connec-
tion.
CM36 NOTE: For Resident System Programming,
refer to the Command Manual.
B
DESCRIPTION
SPLIT CALL FORWARDING-NO ANSWER
• Y=46
(1) X-XXXXXXXX: My Line No.
(2) 0 : As per CM41 Y=0>100, 101 or CME6
Y=07, 08
1 : As per CM41 Y=0>01, 15
• Y=0
(1) 01 : Timing for a trunk incoming call
100: Timing for a trunk incoming call
[Series 3100 software required]
(2) 01-30: 4-120 seconds
If no data is set, the default setting is 32-36
seconds.
• Y=0
(1) 15 : Timing for an internal call or an assist-
ed call
101: Timing for an internal call or an assist-
ed call
[Series 3100 software required]
(2) 01-30: 4-120 seconds
If no data is set, the default setting is 32-36
seconds.
• Y=05
(1) 00-63: Trunk Route No.
(2) 1 : Release signal arrives
• Y=0
(1) Incoming Trunk Route No. + Outgoing
Trunk Route No. assigned by CM35 Y=05
(2) 0: Allow
– 159 –
CALL FORWARDING
DATA
NOTE
(4 second increments)
(4 second increments)
NOTE
NOTE
NWA-008845-001 Rev.5.0
32ch1003.fm