Philips Sopho 2000 IPS User Manual page 173

A
CM35 To apply this feature to incoming calls, set the
trunk route combinations for Tandem Connec-
tion.
NOTE:
CM36 For Resident System Programming,
refer to the Command Manual.
CM08 Specify the setting method for Call Forward-
ing-Busy Line-Outside.
Allow or restrict the ability to set Call
Forwarding-Busy Line for a station with Do
Not Disturb set.
Assign whether an extension can set a destina-
tion of Split Call Forwarding-Busy Line-
Outside by entering only a trunk access code.
Select the trunk route seized for Split Call
Forwarding-Busy Line-Outside.
Select the Call Forwarding type when an
incoming call terminates via CCIS.
B
DESCRIPTION
SPLIT CALL FORWARDING-BUSY LINE
• Y=05
(1) 00-63: Trunk Route No.
(2) 1 : Release signal arrives
• Y=0
(1) Incoming Trunk Route No. + Outgoing
Trunk Route No. assigned by CM35 Y=05
(2) 0: Allow
(1) 222
(2) 0 : Setting when the station goes on hook/
when receiving Service Set Tone
(ORT time out)
1 : Setting when receiving Service Set
Tone (ORT time out)
(1) 240
(2) 0 : Allowed
1 : Restricted
(1) 386
(2) 0 : Restricted
1 : Allowed
(1) 600
(2) 0 : By calling party's tenant/terminating
trunk's tenant
1 : By Call Forwarding setting station's
tenant
(1) 608
(2) 0 : As per CM65 Y=37/38/39
1 : As per CM65 Y=23/24/25
– 155 –
CALL FORWARDING
DATA
NOTE
NOTE
NWA-008845-001 Rev.5.0
32ch1003.fm