Philips Sopho 2000 IPS User Manual page 687

D
CM74 Assign the number to be dialed to each Memo-
ry Slot number, if required. The numbers to be
called are usually set from individual stations
by their station users.
Assign the station name to be displayed to each
Memory Slot number, by character codes or
character.
E
DESCRIPTION
• Y=0
(1) X YY Z
X : 0-9: 1000-Slot Memory Block No.
YY: 00-99: 10-Slot Memory Block No.
Z : 0-9: Memory Parcel No.
(2) Stored No.:
Outgoing Call Access Code (Maximum 4
digits) +
mum 26 digits)
To set a pause into the Stored No., enter "C"
(Fixed Pause=1.5 seconds) or "D" (Pro-
grammable Pause specified by CM41
Y=0>38) after desired digits.
NONE : No data
• Y=1
(1) X YY Z
X : 0-9: 1000-Slot Memory Block No.
YY: 00-99: 10-Slot Memory Block No.
Z : 0-9: Memory Parcel No.
(2) XX...XX: Station Name Character Code
NONE : No data
See APPENDIX B:
Page B2
• Y=2
(1) X YY Z
X : 0-9: 1000-Slot Memory Block No.
YY: 00-99: 10-Slot Memory Block No.
Z : 0-9: Memory Parcel No.
(2) XX...XX: Station Name Character
NONE : No data
– 669 –
STATION SPEED DIALING
DATA
,
+ Called Party's No. (Maxi-
(Maximum 32 digits, 16 charac-
ters)
Character Code
(Maximum 16 characters)
NWA-008845-001 Rev.5.0
JANUARY/20/2006
Table.
32ch1010.fm