HOTEL/MOTEL DID NUMBER ALLOCATION TO GUEST STATION
[Series 3400 software required]
PROGRAMMING
START
CM08
Specify the DID Development Table for guest
station.
NOTE:
CM76
Assign the Number Conversion Block number
for Development Table 0.
Assign the Number Conversion Block number
for Development Table 1.
Allow Hotel/Motel DID number allocation to
guest station.
Assign the data for interpreting the digits re-
ceived.
NOTE:
END
HARDWARE REQUIRED
PMS
AP00-B/AP00-D card with MRCA program (for MP built-in PMS on IP)
DESCRIPTION
Set the second data the same as the
DID Development Table number as-
signed by CM35 Y=170.
This programming is effective when
the destination station number from
PMS is not set.
HOTEL SYSTEM PROGRAMMING
HOTEL/MOTEL DID NUMBER ALLOCATION TO GUEST STATION
(1)
824
(2)
0 : Development Table 1 for DID No. as-
signed by CM76 Y=90
1 : Development Table 0 for DID No. as-
signed by CM76 Y=00
•
Y=00
(1)
X-XXXX: DID No.
(2)
000-999: Number Conversion Block No.
•
Y=90
(1)
X-XXXXXXXX: DID No.
(2)
000-999: Number Conversion Block No.
•
Y=32
(1)
000-999: Number Conversion Block No.
(2)
0: Available
•
Y=01 Day Mode
•
Y=02 Night Mode
•
Y=03 Mode A
•
Y=04 Mode B
(1)
000-999: Number Conversion Block No.
(2)
X-XXXXXXXX: DID station No.
D04: Direct-In Termination
– 799 –
DATA
assigned by CM76 Y=00/90
assigned by CM76 Y=00/90
NWA-008845-001 Rev.5.0
JUNE/01/2007
32ch2001.fm