Flexible Line Key Assignment - Philips Sopho 2000 IPS User Manual

FLEXIBLE LINE KEY ASSIGNMENT

PROGRAMMING
For the applicable feature programming on Flexible Line Key, refer to each feature:
• DO NOT DISTURB
• HOTLINE-INSIDE/OUTSIDE
• INTERCOM
• PROPRIETARY MULTILINE TERMINAL
• SAVE AND REPEAT
• STATION SPEED DIALING
• TRUNK-DIRECT APPEARANCES
To indicate the busy/idle status of the extensions accommodated to the Flexible Line Keys on the Series E
Terminal without the One Touch Speed Dial Keys, assign the following data. Station Speed Dialing mem-
ory and One Touch Key memory assignment are used to implement this feature.
START
CM12 Assign Service Restriction Class A to each sta-
tion.
CM15 Allow Station Speed Dialing in Service Re-
striction Class A assigned by CM12 Y=02.
A
Page 346
Page 407
Page 414
Page 600
Page 665
DESCRIPTION
FLEXIBLE LINE KEY ASSIGNMENT
Page 566
Page 709
• Y=02
(1) X-XXXXXXXX: Station No.
(2) XX ZZ
XX: 00-15 : Service Restriction Class A
• Y=07
(1) 00-15: Service Restriction Class A as-
(2) 1 : Allow
– 384 –
DATA
signed by CM12 Y=02
NWA-008845-001 Rev.5.0
32ch1007.fm