Philips Sopho 2000 IPS User Manual page 653

AP Controlled Stations
[Series 3400 software required]
SMDR service using the AP00 card (PN-AP00-B with AP00 program), a maximum of 504 stations can be
controlled by the AP00 card. When 505 or more stations are accommodated in a system, you have to spec-
ify to each station whether a station is controlled by AP00 card or not.
START
CM12 Specify to each station whether a station is
controlled by AP00 card or not.
NOTE:
END
DESCRIPTION
You can confirm the stations assigned by CM12 Y=49. Execute CM12 Y=91 10 minutes
after AP initialization completed. Enter the first data which was assigned by CM12 Y=49,
the system displays the second data. Check CM12 Y=49 data setting when NONE is dis-
played even though a station is set as a controlled station by AP00 card.
CM12 Y=91 (Confirmation of stations controlled by AP00 card)
(1) X-XXXX: Station No.
(2) 000-503: Controlled Station No. 000-503
NONE : Not controlled
STATION MESSAGE DETAIL RECORDING (SMDR)
• Y=49
(1) X-XXXX: Station No.
(2) 0 : Not controlled
1 : Controlled
3 : Only 504 stations are controlled in or-
der of station registration
(The stations after the 504th are not
controlled)
– 635 –
PROGRAMMING
DATA
NWA-008845-001 Rev.5.0
32ch1010.fm