Philips Sopho 2000 IPS User Manual page 793

C
CM14 When the DAT is required, assign the DAT to
the required LEN.
To provide the restriction announcement for
Wake Up call setting, assign the following
DAT respectively.
• DAT for Wake Up message
• DAT for restriction announcement
[Series 3200 R6.2 software required]
NOTE 1: The DAT card number must be as-
signed to the first LEN (Level 0), the
third LEN (Level 2), the fifth LEN
(Level 4) and the seventh LEN (Lev-
el 6) of each LT slot.
CM44 When an External Announcement Machine is
required, assign the function for Wake Up to
the DK card or MP built-in DK.
CM08 Specify the sending Wake Up message to Ho-
tel Printer and PMS, when setting Wake Up
feature from guest station.
Specify the timing for Wake Up call start.
D
DESCRIPTION
HOTEL SYSTEM PROGRAMMING
(1) XX ZZZ: LEN
XX : 00-59: FP No.
ZZZ: 000-127: Port No.
(2) EB002-EB127:
Digital Announcement Trunk Card No.
For FP No. 00: EB002-EB031
For FP No. 01: EB032-EB063
For FP No. 02: EB064-EB095
For FP No. 03: EB096-EB127
NOTE 2:
(1) XX Y
XX : 00-31: DK Card No. assigned by
CM10/CM14 (E800-E831)
Y : 0-3: Circuit No.
313: MP built-in External Equipment Inter-
face
(2) 0100: External Announcement Machine
for Wake Up Call
(1) 200
(2) 0: Available
(1) 228: Wake Up Call Start Timing
(2) 0 : At preset time
1 : 5 minutes prior to preset time
– 775 –
AUTOMATIC WAKE UP
DATA
EB000 and EB001 are dedicated
to built-in DAT of MP card.
NWA-008845-001 Rev.5.0
JUNE/01/2007
32ch2001.fm