Philips Sopho 2000 IPS User Manual page 335

To abbreviate the ID Code entry when digit conversion on DID call is provided
(CM35 Y=18 is set to "0"):
B
CM35 Set the trunk route to use the calling party
number as the ID Code for DISA.
CM2A Assign the ID Code Development number, for
Call Forwarding set by DISA.
Assign the calling party number as the ID
Code for DISA.
Assign the purpose of ID Code.
Assign Service Restriction Class A assigned
by CM15 Y=134 to the ID Code Pattern num-
ber.
Set the calling party number to be used as the
ID Code for DISA.
Specify the setting station of Manual Call For-
warding set by DISA, if required.
If the station number is set by this command,
Call Forward setting is not available for the
other stations.
END
DESCRIPTION
DIRECT INWARD SYSTEM ACCESS (DISA)
• Y=155
(1) 00-63: Trunk Route No.
(2) 0: Available
• Y=A0
(1) 3: Automatic service setting by DISA
(2) 0-9: ID Code Development No. 00-09
• Y=00-09 ID Code Development No. 00-09
(1) X-XX...XX: Calling Party No.
(2) 0000-2999: ID Code Pattern No.
• Y=10
(1) 0000-2999: ID Code Pattern No.
(2) 2: Validate the ID Code entered from trunks
• Y=12
(1) 0000-2999: ID Code Pattern No.
(2) 00-15 : Service Restriction Class A
• Y=15
(1) 0000-2999: ID Code Pattern No.
(2) 0: Available
• Y=16
(1) 0000-2999: ID Code Pattern No.
(2) X-XXXXXXXX: Station No.
NONE
– 317 –
CALL FORWARDING SET BY DISA
DATA
(Maximum 16 digits)
: All stations
NWA-008845-001 Rev.5.0
32ch1006.fm