Displaying Zone Information - Cisco AP776A - Nexus Converged Network Switch 5020 Configuration Manual

Displaying Zone Information

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Command
Step 3
switch(config-zone)# attribute read-only
switch(config-zone)# no attribute
read-only
To configure the read-only option for a default zone, follow these steps:
Command
Step 1
switch# config t
switch(config)#
Step 2
switch(config)# zone default-zone vsan 1
switch(config-default-zone)#
Step 3
switch(config-default-zone)# attribute
read-only
switch(config-default-zone)# no attribute
read-only
Displaying Zone Information
You can view any zone information by using the show command. If you request information for a
specific object (for example, a specific zone, zone set, VSAN, or alias, or keywords such as brief or
active), only information for the specified object is displayed. If you do not request specific information,
all available information is displayed. See Examples
Example 24-1 Displays Zone Information for All VSANs
switch# show zone
zone name Zone3 vsan 1
pwwn 21:00:00:20:37:6f:db:dd
pwwn 21:00:00:20:37:9c:48:e5
zone name Zone2 vsan 2
fwwn 20:41:00:05:30:00:2a:1e
fwwn 20:42:00:05:30:00:2a:1e
fwwn 20:43:00:05:30:00:2a:1e
zone name Zone1 vsan 1
pwwn 21:00:00:20:37:6f:db:dd
pwwn 21:00:00:20:37:a6:be:2f
pwwn 21:00:00:20:37:9c:48:e5
fcalias Alias1
zone name Techdocs vsan 3
ip-address 10.15.0.0 255.255.255.0
zone name Zone21 vsan 5
pwwn 21:00:00:20:37:a6:be:35
pwwn 21:00:00:20:37:a6:be:39
fcid 0xe000ef
fcid 0xe000e0
symbolic-nodename iqn.test
fwwn 20:1f:00:05:30:00:e5:c6
fwwn 12:12:11:12:11:12:12:10
Cisco MDS 9000 Family CLI Configuration Guide
24-24
Chapter 24 Configuring and Managing Zones
Purpose
Sets read-only attributes for the Sample2 zone.
The default is read-write for all zones.
Note
Reverts the Sample2 zone attributes to read-write.
Purpose
Enters configuration mode.
Enters the default zone configuration submode.
Sets read-only attributes for the default zone.
Reverts the default zone attributes to read-write
(default).
24-1 to 24-16.
OL-18084-01, Cisco MDS NX-OS Release 4.x