Cisco AP776A - Nexus Converged Network Switch 5020 Configuration Manual page 247

Chapter 8 Software Images
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
bootflash: 1000944 blocks (block size 512b)
slot0:
172.22.92.181 uptime is 0 days 2 hours 18 minute(s) 1 second(s)
Last reset at 970069 usecs after Tue Sep 16 22:31:25 1980
Issue the install module command for the required supervisor module (active or standby). This example
Step 2
displays the command being issued for the standby supervisor module in slot 6:
switch# install module 6 loader bootflash:kickstart-image
Note
Step 3 Use the show version command to verify the updated image on the supervisor module.
switch# show version
Cisco Nexus Operating System (NX-OS) Software
TAC support: http://www.cisco.com/tac
Copyright (c) 2002-2009, Cisco Systems, Inc. All rights reserved.
The copyrights to certain works contained herein are owned by
Cisco Systems, Inc. and/or other third parties and are used and
distributed under license. Some parts of this software are covered
under the GNU Public License. A copy of the license is available
at http://www.gnu.org/licenses/gpl.html.
Software
BIOS:
loader:
kickstart: version 1.3(1) ]
system:
BIOS compile time:
kickstart image file is: bootflash:///m9500-sf1ek9-kickstart-mzg.2.0.0.6.bin
kickstart compile time:
system image file is:
system compile time:
Hardware
RAM 1024584 kB
bootflash: 1000944 blocks (block size 512b)
slot0:
172.22.92.181 uptime is 0 days 2 hours 18 minute(s) 1 second(s)
Last reset at 970069 usecs after Tue Sep 16 22:31:25 1980
OL-18084-01, Cisco MDS NX-OS Release 4.x
0 blocks (block size 512b)
Reason: Reset Requested by CLI command reload
System version: 2.0(0.6)
Service:
If you install a loader version that is the same as the currently installed version, the command
will not execute. When both the current version and the installed version are the same, use the
init system command to force a loader upgrade.
version 1.3.1
version 1.2(2) <---------------New running version
version 1.3(1)
0 blocks (block size 512b)
Reason: Reset Requested by CLI command reload
System version: 2.0(0.6)
Service:
08/07/03
10/25/2010 12:00:00
bootflash:///m9500-sf1ek9-mzg.2.0.0.6.bin
10/25/2020 12:00:00
Cisco MDS 9000 Family CLI Configuration Guide
Manual Upgrade on a Dual Supervisor Module Switch
8-29