Verifying The Module Status; Configuring Date, Time, And Time Zone - Cisco AP776A - Nexus Converged Network Switch 5020 Configuration Manual

Chapter 5 Initial Configuration
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
To use the Cisco Fabric Manager, refer to the Cisco MDS 9000 Family Fabric Manager Configuration
Guide.

Verifying the Module Status

Before you begin configuring the switch, you need to ensure that the modules in the chassis are
functioning as designed.
To verify the status of a module at any time, issue the show module command in EXEC mode. A sample
output of the show module command follows:
switch# show module
Mod
---
2
5
6
8
9
Mod
---
2
5
6
8
9
Mod
---
2
5
6
8
9
* this terminal session
If the status is OK or active, you can continue with your configuration (see
Modules").

Configuring Date, Time, and Time Zone

Switches in the Cisco MDS 9000 Family use Universal Coordinated Time (UTC), which is the same as
Greenwich Mean Time (GMT).
To change the default time on the switch, issue the clock command from EXEC mode:
switch# clock set {HH:MM:SS DD Month-in-words YYYY}
For example:
switch# clock set 15:58:09 23 September 2002
Mon Sep 23 15:58:09 UTC 2002
OL-18084-01, Cisco MDS NX-OS Release 4.x
Ports Module-Type
----- ------------------------------- ------------------ ------------
8 IP Storage Services Module
0 Supervisor/Fabric-1
0 Supervisor/Fabric-1
0 Caching Services Module
32 1/2 Gbps FC Module
Sw Hw World-Wide-Name(s) (WWN)
----------- ------ --------------------------------------------------
1.3(0.106a) 0.206 20:41:00:05:30:00:00:00 to 20:48:00:05:30:00:00:00
1.3(0.106a) 0.602 --
1.3(0.106a)) 0.602 --
1.3(0.106a) 0.702 --
1.3(0.106a) 0.3 22:01:00:05:30:00:00:00 to 22:20:00:05:30:00:00:00
MAC-Address(es)
--------------------------------------
00-05-30-00-9d-d2 to 00-05-30-00-9d-de
00-05-30-00-64-be to 00-05-30-00-64-c2
00-d0-97-38-b3-f9 to 00-d0-97-38-b3-fd
00-05-30-01-37-7a to 00-05-30-01-37-fe
00-05-30-00-2d-e2 to 00-05-30-00-2d-e6
Model Status
DS-X9308-SMIP ok
DS-X9530-SF1-K9 active *
DS-X9530-SF1-K9 ha-standby
DS-X9560-SMAP ok
DS-X9032 ok
Serial-Num
----------
JAB064605a2
JAB06350B1R
JAB06350B1R
JAB072705ja
JAB06280ae9
Chapter 12, "Managing
Cisco MDS 9000 Family CLI Configuration Guide
Verifying the Module Status
5-17