Cisco AP776A - Nexus Converged Network Switch 5020 Configuration Manual page 597

Cisco mds 9000 family cli configuration guide - release 4.x (ol-18084-01, february 2009)
Hide thumbs Also See for AP776A - Nexus Converged Network Switch 5020:
Table of Contents

Advertisement

Chapter 23
Configuring Inter-VSAN Routing
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Figure 23-4
Note
VSANs with the same VSAN ID but different AFIDs are counted as two separate VSANs.
OL-18084-01, Cisco MDS NX-OS Release 4.x
If dissimilar zones exist in two merged fabrics, the zone from each fabric is cloned in the
distributed zone set with appropriate names (see
Fabric Merge Consequences
Fabrics with
dissimilar zones
Fabric X
Cisco MDS switch
Cisco MDS switch
ivzs1
ivz1
wwn1
wwn2
You can configure different IVR configurations in different Cisco MDS switches.
Be aware that the merge follows more liberal approach in order to avoid traffic disruption. After the
merge, the configuration will be a union of the configurations that were present on the two switches
involved in the merge.
The configurations are merged even if both fabrics have different configurations.
A union of zones and zone sets are used to get the merged zones and zone sets. If a dissimilar
zone exists in two fabrics, the dissimilar zones are cloned into the zone set with appropriate
names so both zones are present.
The merged topology contains a union of the topology entries for both fabrics.
The merge will fail if the merged database contains more topology entries than the allowed
maximum.
The total number of VSANs across the two fabrics cannot exceed 128.
The total number of IVR-enabled switches across the two fabrics cannot exceed 128.
The total number of zone members across the two fabrics cannot exceed 10,000. As of Cisco
SAN-OS Release 3.0(3), the total number of zone members across the two fabrics cannot exceed
20,000. A zone member is counted twice if it exists in two zones.
Fabric Y
Cisco MDS switch
ivzs1
ivz1
wwn3
wwn4
Cisco MDS 9000 Family CLI Configuration Guide
Database Merge Guidelines
Figure
23-4).
Both zones contained
in the zone set
Fabric XY
Cisco MDS switch
Cisco MDS switch
Cisco MDS switch
ISL
ivzs1
ivz1
wwn1
wwn2
ivz1 wwnC
wwn3
wwn4
witch
ivzs1
ivz1
wwn1
wwn2
ivz1 wwnC
wwn3
wwn4
23-37

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents