Displaying Epld Versions - Cisco AP776A - Nexus Converged Network Switch 5020 Configuration Manual

Cisco mds 9000 family cli configuration guide - release 4.x (ol-18084-01, february 2009)

Hide thumbs Also See for AP776A - Nexus Converged Network Switch 5020:

Command reference manual (1640 pages)

Configuration manual (1486 pages)

Reference (886 pages)

Table of Contents

EPLD Configuration

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

Use the install module number epld url command on the active supervisor module to upgrade EPLD

images for a module.

switch# install module 2 epld bootflash:m9000-epld-2.1.2.img

-------------------------------------------------------

UD Flow Control

PCI ASIC I/F

WARNING: Upgrade process could take upto 15 minutes.

Module 2 will be powered down now!!

Do you want to continue (y/n) ? y

<------------------------------------------------------------progress twirl

Module 2 EPLD upgrade is successful

If you forcefully upgrade a module that is not online, all EPLDs are forcefully upgraded. If the module

is not present in the switch, an error is returned. If the module is present, the command process continues.

To upgrade a module that is not online but is present in the chassis, use the same command. The switch

software prompts you to continue after reporting the module state. When you confirm your intention to

continue, the upgrade continues.

switch# install module 2 epld bootflash:m9000-epld-2.1.2.img

<------------------------------------------------------------progress twirl

Module 2 EPLD upgrade is successful

The same procedure used to upgrade the EPLD images on a module can be used to downgrade the EPLD