Cisco AP776A - Nexus Converged Network Switch 5020 Configuration Manual page 228

Automated Upgrades
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
switch# copy tftp://10.16.10.100/system-img bootflash:system-img
Trying to connect to tftp server......
Note
Download a kickstart image to the active supervisor module bootflash: from a TFTP server, if necessary.
Step 5
switch# copy tftp://10.16.10.100/kickstart-img bootflash:kickstart-img
Trying to connect to tftp server......
Perform the upgrade by issuing the install all command.
Step 6
Note
switch# install all system bootflash:system-img kickstart bootflash:kickstart-img
Verifying image bootflash:/kickstart-img
[####################] 100% -- SUCCESS
Verifying image bootflash:/system-img
[####################] 100% -- SUCCESS
Extracting "slc" version from image bootflash:/system-img.
[####################] 100% -- SUCCESS
Extracting "ips" version from image bootflash:/system-img.
[####################] 100% -- SUCCESS
Extracting "system" version from image bootflash:/system-img.
[####################] 100% -- SUCCESS
Extracting "kickstart" version from image bootflash:/kickstart-img.
[####################] 100% -- SUCCESS
Extracting "loader" version from image bootflash:/kickstart-img.
[####################] 100% -- SUCCESS
Compatibility check is done:
Module
------
Images will be upgraded according to following table:
Module
------
Cisco MDS 9000 Family CLI Configuration Guide
8-10
Ensure that you download the correct Cisco NX-OS system image. The system image for
Supervisor-1 modules is different from the system image for Supervisor-2 modules.
On a dual supervisor module switch, always use the default bootflash: in the install all command
syntax. Do not qualify it with "//sup-active/" or "//sup-local". Always use the following syntax:
install all system bootflash:filename kickstart bootflash:filename.
bootable Impact
-------- --------------
1 yes non-disruptive
2 yes disruptive
3 yes disruptive
4 yes non-disruptive
5 yes non-disruptive
6 yes non-disruptive
Image Running-Version
---------- --------------------
1 slc
1 bios v1.1.0(10/24/03)
2 ips
2 bios v1.1.0(10/24/03)
3 ips
3 bios v1.1.0(10/24/03)
Install-type Reason
------------ ------
rolling
rolling Hitless upgrade is not supported
rolling Hitless upgrade is not supported
rolling
reset
reset
New-Version
--------------------
1.3(2a)
v1.1.0(10/24/03)
1.3(2a)
v1.1.0(10/24/03)
1.3(2a)
v1.1.0(10/24/03)
Chapter 8 Software Images
Upg-Required
------------
1.3(1) yes
no
1.3(1) yes
no
1.3(1) yes
no
OL-18084-01, Cisco MDS NX-OS Release 4.x