Default Settings - Cisco AP776A - Nexus Converged Network Switch 5020 Configuration Manual

Default Settings

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Use the show rscn session status vsan command to display session status information for RSCN
configuration distribution.
A merge failure results when the RSCN timer values are different on the merging fabrics.
Note
switch# show rscn session status vsan 1
Session Parameters for VSAN: 1
-------------------------------
Last Action
Last Action Result
Last Action Failure Reason : None
Use the show rscn pending command to display the set of configuration commands that would take
effect when you commit the configuration.
The pending database includes both existing and modified configuration.
Note
switch# show rscn pending
rscn event-tov 2000 ms vsan 1
rscn event-tov 2000 ms vsan 2
rscn event-tov 300 ms vsan 10
Use the show rscn pending-diff command to display the difference between pending and active
configurations. The following example shows the time-out value for VSAN 10 was changed from 2000
milliseconds (default) to 300 milliseconds.
switch# show rscn pending-diff
- rscn event-tov 2000 ms vsan 10
+ rscn event-tov 300 ms vsan 10
Default Settings
Table 27-1
Table 27-1
Parameters
RSCN timer value
RSCN timer configuration distribution
Cisco MDS 9000 Family CLI Configuration Guide
27-14
: Commit
: Success
lists the default settings for RSCN.
Default RSCN Settings
Chapter 27 Managing FLOGI, Name Server, FDMI, and RSCN Databases
Default
2000 milliseconds for Fibre Channel VSANs
1000 milliseconds for FICON VSANs
Disabled
OL-18084-01, Cisco MDS NX-OS Release 4.x