Cisco AP776A - Nexus Converged Network Switch 5020 Configuration Manual page 839

Chapter 34 Configuring RADIUS and TACACS+
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Command
Step 1
switch# config t
Step 2
switch(config)# tacacs-server deadtime 30
Step 3
switch(config)# no tacacs-server deadtime 30
OL-18084-01, Cisco MDS NX-OS Release 4.x
Purpose
Enters configuration mode.
Configures the dead-time interval value in
minutes. The valid range is 1 to 1440 minutes.
Reverts to the default value (0 minutes).
Note When the dead-time interval is 0 minutes,
TACACS+ server monitoring is not
performed unless the TACACS+ server is
part of a server group and the dead-time
interval for the group is greater than 0
minutes. (See the
RADIUS" section on page
Cisco MDS 9000 Family CLI Configuration Guide
Configuring TACACS+
"Configuring
34-8.)
34-23