Configuring Module Interface Shared Resources - Cisco AP776A - Nexus Converged Network Switch 5020 Configuration Manual

Configuring Module Interface Shared Resources

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Table 15-19
PortChannel
Members
Generation 3
interfaces
1. If resources are not available.
Use the show port-channel compatibility parameters command to obtain information about
PortChannel addition errors.
Configuring Module Interface Shared Resources
This section describes how to configure Generation 2 and Generation 3 module interface shared
resources and contains the following sections:
•
•
•
•
•
•
•
•
•
•
•
•
Cisco MDS 9000 Family CLI Configuration Guide
15-28
PortChannel Configuration and Addition Results (continued)
Configured Speed
PortChannel
Auto
Auto max 2000
Auto max 2000
Auto
Auto max 2000
Auto
Displaying Interface Capabilities, page 15-29
Configuration Guidelines for 48-Port, 24-Port, and 4/44-Port 8-Gbps Fibre Channel Switching
Modules, page 15-30
Configuration Guidelines for 48-Port and 24-Port 4-Gbps Fibre Channel Switching Modules,
page 15-31
Configuration Guidelines for 12-Port 4-Gbps Switching Module Interfaces, page 15-32
Configuration Guidelines for 4-Port 10-Gbps Switching Module Interfaces, page 15-33
Configuring Port Speed, page 15-33
Configuring Rate Mode, page 15-35
Configuring Oversubscription Ratio Restrictions, page 15-40
Configuring Bandwidth Fairness, page 15-45
Taking Interfaces Out of Service, page 15-47
Releasing Shared Resources in a Port Group, page 15-48
Enabling the Buffer-to-Buffer State Change Number, page 15-49
Chapter 15 Configuring Generation 2 and Generation 3 Switching Modules
New Member
New Member Type
Auto Generation 1
Auto Generation 1
Auto Generation 2
Auto max 2000 Generation 2
Auto Generation 3
Auto max 2000 Generation 3
Addition Type Result
Normal or force Fail
Normal or force Pass
Normal Fail
Force Pass
Normal Fail
Force Pass
Normal Fail
Force Pass
Normal Fail
Force Pass
OL-18084-01, Cisco MDS NX-OS Release 4.x