Unlocking The Startup Configuration File; Copying Configuration Files - Cisco AP776A - Nexus Converged Network Switch 5020 Configuration Manual

Chapter 9 Working with Configuration Files
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
switch# show cfs application
----------------------------------------------
Application
----------------------------------------------
ntp
fscm
islb
role
rscn
radius
fctimer
syslogd
callhome
fcdomain
device-alias
Total number of entries = 11

Unlocking the Startup Configuration File

The startup configuration file can be locked by applications on the switch. To display locks on the startup
configuration file, use the following command:
switch# show system internal sysmgr startup-config locks
To release a lock on the startup configuration file, use the following command:
switch# system startup-config unlock 10

Copying Configuration Files

The syntax for the copy command follows and is explained in
switch# copy scheme://server/filename scheme://server/filename
Table 9-1
Scheme
bootflash
slot0
volatile
nvram
system
OL-18084-01, Cisco MDS NX-OS Release 4.x
Enabled Scope
No Physical-all
Yes Physical-fc
No Physical-fc
No Physical-all
No Logical
No Physical-all
No Physical-fc
No Physical-all
No Physical-all
No Logical
Yes Physical-fc
copy Command Syntax
Server
sup-active
sup-standby
sup-1 or module-5
sup-2 or module-6
sup-local
sup-remote
—
—
—
—
Managing Configuration Files
Table 9-1.
File Name
User-specified
User-specified
User-specified
startup-config or snapshot-config
running-config
Cisco MDS 9000 Family CLI Configuration Guide
9-5