Reloading Modules; Reloading A Switch; Power Cycling Modules - Cisco AP776A - Nexus Converged Network Switch 5020 Configuration Manual

Reloading Modules

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
This example shows the output of the dir bootflash: command:
root
admin
admin
root
root
admin
admin
root
admin
admin
You can also use the attach module command as follows:
•
•
Reloading Modules
You can reload the entire switch, reset specific modules in the switch, or reload the image on specific
modules in the switch.
This section includes the following topics:
•
•
•

Reloading a Switch

To reload the switch, issue the reload command without any options. When you issue this command,
you reboot the switch (see
If you need to issue the reload command, be sure to save the running configuration using the copy
Note
running-config startup-config command.

Power Cycling Modules

To power cycle any module, follow these steps:
Identify the module that needs to be reset.
Step 1
Cisco MDS 9000 Family CLI Configuration Guide
12-6
14502912 Jan 13 12:23:52 1980 kickstart_image1
14424576 Jan 14 06:47:29 1980 kickstart_image2
14469632 Jan 14 01:29:16 1980 kickstart_image3
14490112 Jan 08 07:25:50 1980 kickstart_image4
12288 Jan 16 15:49:24 1980 lost+found/
14466048 Jan 14 02:40:16 1980 kickstart_image5
24206675 Jan 14 02:57:03 1980 m9500-sf1ek.bin
19084510 Jan 13 12:23:28 1980 system_image1
19066505 Jan 14 06:45:16 1980 system_image2
18960567 Jan 14 01:25:21 1980 system_image5
Usage for bootflash: filesystem
158516224 bytes total used
102400 bytes free
167255040 bytes available
To display the standby supervisor module information, although you cannot configure the standby
supervisor module using this command.
To display the switching module portion of the Cisco MDS 9200 Series supervisor module which
resides in slot 1.
Reloading a Switch, page 12-6
Power Cycling Modules, page 12-6
Reloading Switching Modules, page 12-7
Chapter 8, "Software Images").
OL-18084-01, Cisco MDS NX-OS Release 4.x
Chapter 12 Managing Modules