Automated Upgrades; Benefits Of Using The Install All Command - Cisco AP776A - Nexus Converged Network Switch 5020 Configuration Manual

Chapter 8 Software Images
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

Automated Upgrades

The install all command upgrades all modules in any Cisco MDS 9000 Family switch.
provides an overview of the switch status before and after issuing the install all command.
Figure 8-1
2.1(2b) to 3.0(1)
The install all command automatically verifies if the standby supervisor module is functioning (if
present). If it is not functioning, it reloads that module and uses the reload module slot force-dnld
command to force it to function.

Benefits of Using the install all Command

The install all command provides the following benefits:
•
•
•
•
•
•
•
•
OL-18084-01, Cisco MDS NX-OS Release 4.x
The Effect of the install all Command
Switch before issuing
the install all comand
Slot 5
Active
install all
supervisor
module
2.1(2b)
You can upgrade the entire switch using just one procedure command.
You can receive descriptive information on the intended changes to your system before you continue
with the installation.
You have the option to cancel the command. Once the effects of the command are presented, you
can continue or cancel when you see this question (the default is no):
Do you want to continue (y/n) [n] :y
You can upgrade the entire switch using the least disruptive procedure.
You can see the progress of this command on the console, Telnet, and SSH screens:
– After a switchover process, you can see the progress from both the supervisor modules.
– Before a switchover process, you can only see the progress from the active supervisor module.
The command automatically checks the image integrity. This includes the running kickstart and
system images.
The command performs a platform validity check to verify that a wrong image is not used. For
example, to check if an MDS 9500 Series image is used inadvertently to upgrade an MDS 9200
Series switch.
The Ctrl-c escape sequence gracefully ends the command. The command sequence completes the
update step in progress and returns to the switch prompt. (Other upgrade steps cannot be ended using
Ctrl-c.)
Cisco MDS 9500 Series switch
Slot 6
Standby
supervisor
module
2.1(2b)
Cisco MDS 9000 Family CLI Configuration Guide
Automated Upgrades
Figure 8-1
Switch after the install all
comand completes
Slot 5 Slot 6
Standby Active
supervisor supervisor
module module
3.0(1) 3.0(1)
8-7