Cisco AP776A - Nexus Converged Network Switch 5020 Configuration Manual page 307

Chapter 12 Managing Modules
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
c.
d.
Note
OL-18084-01, Cisco MDS NX-OS Release 4.x
15944704 Apr 06 16:46:04 2005 m9500-sf1ek9-kickstart-mz.2.1.1a.bin
48063243 Mar 21 15:34:46 2005 m9500-sf1ek9-mz.2.1.1.bin
48036239 Apr 06 16:45:41 2005 m9500-sf1ek9-mz.2.1.1a.bin
Usage for slot:
141066240 bytes used
43493376 bytes free
184559616 bytes total
switch# show module
Mod Ports Module-Type
--- ----- -------------------------------- ------------------ ------------
2 32 Storage Services Module
5 0 Supervisor/Fabric-1
6 0 Supervisor/Fabric-1
...
The show module command output shows that the standby supervisor is in slot 6. Use the attach
command to access the supervisor module.
switch# attach module 6
...
switch(standby)# dir slot0:
12288 Jan 01 00:01:06 1980 lost+found/
14765056 Mar 21 15:35:06 2005 m9500-sf1ek9-kickstart-mz.2.1.1.bin
15944704 Apr 06 16:46:04 2005 m9500-sf1ek9-kickstart-mz.2.1.1a.bin
48063243 Mar 21 15:34:46 2005 m9500-sf1ek9-mz.2.1.1.bin
48036239 Apr 06 16:45:41 2005 m9500-sf1ek9-mz.2.1.1a.bin
Usage for slot0:
141066240 bytes used
43493376 bytes free
184559616 bytes total
switch(standby)# exit
switch#
If there is not enough space, delete unneeded files.
switch# delete bootflash:m9500-sf1ek9-kickstart-mz.2.1.1.bin
switch# attach module 6
switch(standby)#
The show module command output shows that the standby supervisor is in slot 6. Use the attach
command to access the supervisor module.
switch(standby)# delete bootflash:m9500-sf1ek9-kickstart-mz.2.1.1.bin
switch(standby)# exit
switch#
Copy the EPLD image file from the FTP server to the bootflash: or slot0: device in the active
supervisor module. The following example shows how to copy to bootflash:
switch# copy ftp://10.1.7.2/m9000-epld-2.1.2.img bootflash:m9000-epld-2.1.2.img
The system will automatically synchronize the ELPD image to the standby supervisor if
automatic copying is enabled.
switch# config t
switch(config)# boot auto-copy
Model Status
DS-X9032-SSM ok
DS-X9530-SF1-K9 active *
DS-X9530-SF1-K9 ha-standby
Cisco MDS 9000 Family CLI Configuration Guide
EPLD Configuration
12-15