Displaying The Pending Configuration; Committing The Distribution; Discarding The Distribution Session - Cisco AP776A - Nexus Converged Network Switch 5020 Configuration Manual

AAA Server Distribution
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
session db: exists
merge protocol status: merge activation done
last operation: enable
last operation status: success

Displaying the Pending Configuration

To display the RADIUS or TACACS+ global and/or server configuration stored in the temporary buffer
use the show radius pending command, follow these steps:
switch(config)# show radius pending-diff
To display the TACACS+ global and/or server configuration stored in the temporary buffer, use the show
tacacs+ pending command.
switch(config)# show tacacs+ pending-diff

Committing the Distribution

The RADIUS or TACACS+ global and/or server configuration stored in the temporary buffer can be
applied to the running configuration across all switches in the fabric (including the originating switch).
To commit RADIUS configuration changes, follow these steps:
Command
Step 1
switch# config t
Step 2
switch(config)# radius commit
To commit TACACS+ configuration changes, follow these steps:
Command
Step 1
switch# config t
Step 2
switch(config)# tacacs+ commit

Discarding the Distribution Session

Discarding the distribution of a session in progress causes the configuration in the temporary buffer to
be dropped. The distribution is not applied.
Cisco MDS 9000 Family CLI Configuration Guide
34-32
+radius-server host testhost1 authentication accounting
+radius-server host testhost2 authentication accounting
+tacacs-server host testhost3
+tacacs-server host testhost4
Chapter 34
Purpose
Enters configuration mode.
Commits the RADIUS configuration changes to the running
configuration.
Purpose
Enters configuration mode.
Commits the TACACS+ configuration changes to the running
configuration.
Configuring RADIUS and TACACS+
OL-18084-01, Cisco MDS NX-OS Release 4.x