Verifying Isns Client Configuration - Cisco AP776A - Nexus Converged Network Switch 5020 Configuration Manual

Chapter 43 Configuring iSCSI
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
To tag a profile to an interface, follow these steps:
Command
Step 1
switch# config t
switch(config)#
Step 2
switch(config)# interface gigabitethernet 4/1
switch(config-if)#
Step 3
switch(config-if)# isns MyIsns
To untag a profile from an interface, follow these steps:
Command
Step 1
switch# config t
switch(config)#
Step 2
switch(config)# interface gigabitethernet 5/1
switch(config-if)#
Step 3
switch(config-if)# no isns OldIsns
Use the isns reregister command in EXEC mode to re-register associated iSNS objects with the iSNS
server.
switch# isns reregister gigabitethernet 1/4
switch# isns reregister port-channel 1

Verifying iSNS Client Configuration

Use the show isns profile command to view configured iSNS profiles. Profile ABC has two portals
registered with the iSNS server. Each portal corresponds to a particular interface. Profile XYZ has a
specified iSNS server, but does not have any tagged interfaces configured (see
Example
Example 43-19 Displays Information for Configured iSNS Profiles
switch# show isns profile
iSNS profile name ABC
tagged interface GigabitEthernet2/3
tagged interface GigabitEthernet2/2
iSNS Server 10.10.100.204
iSNS profile name XYZ
iSNS Server 10.10.100.211
Example 43-20 Displays a Specified iSNS Profile
switch# show isns profile ABC
iSNS profile name ABC
tagged interface GigabitEthernet2/3
tagged interface GigabitEthernet2/2
iSNS Server 10.10.100.204
Use the show isns profile counters command to view all configured profiles with the iSNS PDU
statistics for each tagged interface (see
OL-18084-01, Cisco MDS NX-OS Release 4.x
43-20).
Purpose
Enters configuration mode.
Configures the specified Gigabit Ethernet
interface.
Tags a profile to an interface.
Purpose
Enters configuration mode.
Configures the specified Gigabit Ethernet
interface.
Untags a profile from an interface.
Example 43-21 and Example
Cisco MDS 9000 Family CLI Configuration Guide
Example 43-19
43-22).
iSNS
and
43-81