Configuring User Accounts - Cisco AP776A - Nexus Converged Network Switch 5020 Configuration Manual

Configuring User Accounts

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Table 32-1
CLI Operation
CLEAR
EXEC
Example 32-5
named my_role.
Example 32-5 Displays CLI Operation to SNMP Operation Mapping
switch# show role name my_role
Role:my_role
vsan policy:permit (default)
---------------------------------------------
Rule
---------------------------------------------
Although CONFIG is denied for NTP in rule 4, rule 9 allows the SET to NTP MIB objects because EXEC
Note
also maps to the SNMP SET operation.
Configuring User Accounts
Every Cisco MDS 9000 Family switch user has the account information stored by the system. Your
authentication information, user name, user password, password expiration date, and role membership
are stored in your user profile.
The tasks explained in this section enable you to create users and modify the profile of an existing user.
These tasks are restricted to privileged users as determined by your administrator.
This section includes the following topics:
•
•
•
•
•
Cisco MDS 9000 Family CLI Configuration Guide
32-10
CLI Operation to SNMP Operation Mapping (continued)
shows the privileges and rules mapping CLI operations to SNMP operations for a role
Type Command-type
1. permit clear
2. deny clear
3. permit config
4. deny config
5. permit debug
6. deny debug
7. permit show
8. deny show
9. permit exec
About Users, page 32-11
Characteristics of Strong Passwords, page 32-11
Configuring Users, page 32-12
Logging Out Users, page 32-13
Displaying User Account Information, page 32-13
Chapter 32
SNMP Operation
SET
SET
Feature
*
ntp
*
ntp
*
ntp
*
ntp
*
Configuring Users and Common Roles
OL-18084-01, Cisco MDS NX-OS Release 4.x