Default Settings - Cisco AP776A - Nexus Converged Network Switch 5020 Configuration Manual

Default Settings

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Number of sWWN deny
...
To verify the status of the active database and the auto-learning configuration, use the show
port-security status command (see
Example 39-10 Displays the Port Security Status
switch# show port-security status
Fabric Distribution Enabled
VSAN 1 :No Active database, learning is disabled, Session Lock Taken
VSAN 2 :No Active database, learning is disabled, Session Lock Taken
...
The show port-security command displays the previous 100 violations by default (see
Example 39-11 Displays the Violations in the Port Security Database
switch# show port-security violations
------------------------------------------------------------------------------------------
VSAN
------------------------------------------------------------------------------------------
1
1
2
[Total 2 entries]
The show port-security command issued with the last number option displays only the specified
number of entries that appear first.
Default Settings
Table 39-5
Table 39-5
Parameters
Auto-learn
Port security
Distribution
Cisco MDS 9000 Family CLI Configuration Guide
39-20
: 0
Interface Logging-in Entity
fc1/13 21:00:00:e0:8b:06:d9:1d(pwwn)
20:00:00:e0:8b:06:d9:1d(nwwn)
fc1/12 50:06:04:82:bc:01:c3:84(pwwn)
50:06:04:82:bc:01:c3:84(nwwn)
port-channel 1 20:00:00:05:30:00:95:de(swwn)
lists the default settings for all port security features in any switch.
Default Security Settings
Default
Enabled if port security is enabled.
Disabled.
Disabled.
Note
Example 39-10).
Enabling distribution enables it on all VSANs in the switch.
Chapter 39 Configuring Port Security
Example
Last-Time [Repeat count]
Jul 9 08:32:20 2003
Jul 9 08:32:20 2003
Jul 9 08:32:40 2003
OL-18084-01, Cisco MDS NX-OS Release 4.x
39-11).
[20]
[1]
[1]