Restoring Zones; Renaming Zones, Zone Sets, And Aliases - Cisco AP776A - Nexus Converged Network Switch 5020 Configuration Manual

Chapter 24 Configuring and Managing Zones
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

Restoring Zones

Figure 24-7
Step 1 to restore data from a remote server:
a.
b.
c.
d.
e.
Click View Config to see information on how the zone configuration file from a remote server will be
Note
restored.
Backup and Restore options are available to switches that run Cisco NX-OS Release 4.1(3) or later.
Note

Renaming Zones, Zone Sets, and Aliases

To rename a zone, zone set, fcalias, or zone-attribute-group, follow these steps:
Command
Step 1
switch# config t
Step 2
switch(config)# zoneset rename oldname newname
vsan 2
switch(config)# zone rename oldname newname vsan 2
switch(config)# fcalias rename oldname newname
vsan 2
switch(config)# zone-attribute-group rename
oldname newname vsan 2
Step 3
switch(config)# zoneset activate name newname
vsan 2
OL-18084-01, Cisco MDS NX-OS Release 4.x
Using—Select the protocol.
Server IP Address—Enter the IP address of the server.
UserName—Enter the name of the user.
Password—Enter the password for the user.
File Name—Enter the path and the filename.
Purpose
Enters configuration mode.
Renames a zone set in the specified
VSAN.
Renames a zone in the specified VSAN.
Renames a fcalias in the specified VSAN.
Renames a zone attribute group in the
specified VSAN.
Activates the zone set and updates the new
zone name in the active zone set.
Cisco MDS 9000 Family CLI Configuration Guide
Zone Set Duplication
24-17