Using The Install All Command - Cisco AP776A - Nexus Converged Network Switch 5020 Configuration Manual

Chapter 8 Software Images
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

Using the install all Command

Ensure that there is enough space available on the active and standby supervisor module bootflash: to
Note
store the images being installed, even if the images are supplied in slot0:. The system will automatically
synchronize the images to the standby supervisor module.
To perform an automated software upgrade on any switch, follow these steps:
Step 1 Log into the switch through the console, Telnet, or SSH port of the active supervisor module.
Create a backup of your existing configuration file, if required (see the
Step 2
section on page
Verify that you have enough free space available on the active and standby supervisor module bootflash:.
Step 3
The download site on Cisco.com shows the size of the system image file in bytes. If there is not adequate
space, delete files using the delete filename EXEC command.
switch# dir bootflash:
14765056 Mar 21 15:35:06 2005 m9500-sf1ek9-kickstart-mz.2.1.1.bin
15944704 Apr 06 16:46:04 2005 m9500-sf1ek9-kickstart-mz.2.1.1a.bin
48063243 Mar 21 15:34:46 2005 m9500-sf1ek9-mz.2.1.1.bin
48036239 Apr 06 16:45:41 2005 m9500-sf1ek9-mz.2.1.1a.bin
Usage for bootflash://sup-local
141066240 bytes used
43493376 bytes free
184559616 bytes total
switch# show module
Mod
---
2
5
6
...
The show module command output shows that the standby supervisor is in slot 6. Use the attach
command to access the supervisor module.
switch# attach module 6
...
switch(standby)# dir bootflash:
14765056 Mar 21 15:35:06 2005 m9500-sf1ek9-kickstart-mz.2.1.1.bin
15944704 Apr 06 16:46:04 2005 m9500-sf1ek9-kickstart-mz.2.1.1a.bin
48063243 Mar 21 15:34:46 2005 m9500-sf1ek9-mz.2.1.1.bin
48036239 Apr 06 16:45:41 2005 m9500-sf1ek9-mz.2.1.1a.bin
Usage for bootflash://sup-local
141066240 bytes used
43493376 bytes free
184559616 bytes total
switch(standby)# exit
switch#
Download a Cisco NX-OS system image to the active supervisor module bootflash: from a TFTP server,
Step 4
if necessary.
OL-18084-01, Cisco MDS NX-OS Release 4.x
9-1).
12288 Jan 01 00:01:06 1980 lost+found/
Ports Module-Type
----- -------------------------------- ------------------ ------------
32 Storage Services Module
0 Supervisor/Fabric-1
0 Supervisor/Fabric-1
12288 Jan 01 00:01:06 1980 lost+found/
"Managing Configuration Files"
Model Status
DS-X9032-SSM ok
DS-X9530-SF1-K9 active *
DS-X9530-SF1-K9 ha-standby
Cisco MDS 9000 Family CLI Configuration Guide
Automated Upgrades
8-9