Sample Install All Commands - Cisco AP776A - Nexus Converged Network Switch 5020 Configuration Manual

Chapter 8 Software Images
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

Sample install all Commands

Example 8-4
connected to the active supervisor module. Once a switchover happens, you can see the rest of the output
from the console terminal of the standby supervisor module.
continuation of the install all command on the console of the standby supervisor module.
displays the result of the install all command issued from a console terminal for a system that contains
an SSI image.
Similarly, you can view the results of the install all command issued from the SSH or Telnet terminal
that is connected to the active supervisor module. Once a switchover happens, you need to log back into
the switch and issue the show install all status command (see the
on page
Example 8-4
Hacienda# install all system bootflash:system-img kickstart bootflash:kickstart-img
Verifying image bootflash:/kickstart-img
[####################] 100% -- SUCCESS
Verifying image bootflash:/system-img
[####################] 100% -- SUCCESS
Extracting "slc" version from image bootflash:/system-img.
[####################] 100% -- SUCCESS
Extracting "ips" version from image bootflash:/system-img.
[####################] 100% -- SUCCESS
Extracting "system" version from image bootflash:/system-img.
[####################] 100% -- SUCCESS
Extracting "kickstart" version from image bootflash:/kickstart-img.
[####################] 100% -- SUCCESS
Extracting "loader" version from image bootflash:/kickstart-img.
[####################] 100% -- SUCCESS
Compatibility check is done:
Module
------
Images will be upgraded according to following table:
Module
------
OL-18084-01, Cisco MDS NX-OS Release 4.x
displays the result of the install all command issued from a console terminal that is
8-20).
Successful install all Command Issued from the Active Console
bootable Impact
-------- --------------
1 yes non-disruptive
2 yes disruptive
3 yes disruptive
4 yes non-disruptive
5 yes non-disruptive
6 yes non-disruptive
Image Running-Version
---------- --------------------
1 slc
1 bios v1.1.0(10/24/03)
2 ips
2 bios v1.1.0(10/24/03)
3 ips
Example 8-5
Install-type Reason
------------ ------
rolling
rolling Hitless upgrade is not supported
rolling Hitless upgrade is not supported
rolling
reset
reset
New-Version
--------------------
1.3(2a)
v1.1.0(10/24/03)
1.3(2a)
v1.1.0(10/24/03)
1.3(2a)
Cisco MDS 9000 Family CLI Configuration Guide
Automated Upgrades
displays the file output
"Upgrade Status Verification" section
Upg-Required
------------
1.3(1) yes
no
1.3(1) yes
no
1.3(1) yes
Example 8-6
8-13